» Bullet-proof doors/Series BRFB6

Bullet-proof doors Series BRFB6

BRBF6 - s3084[1]

his series represents the resistant leaf structure that can meet the requirements of institutions that run a very high risk of armed attack.

This door meets the standard EN 1522 – 15233 / FB6, entitled bullet-proof construction. Tests carried out by the Royal Military Academy.

Sound attenuation by the CSTC that meets the standards EN ISO 140-3 and 717-1 Rw = 42 dB

Leaf

Door with one or two metal leaves, and with covering on three sides, ± 70 mm thick, consisting of a double-wall full door panel, formed by ballistic plates. The internal insulation is in high-density rock wool.

Frames

Tubular

Rotating parts

The leaves are suspended from the frame with at least three welded steel hinges with an external diameter of 20 mm; they are mounted on ball bearings, which enables them to have great inertia, for openings slightly exceeding 180° depending on the case. In addition, they are designed so that it is impossible to drive out their pin.

We can add anti-unhinging mechanisms as an option. This is not very useful for doors with hinges inside the room to be protected. Conversely, they are highly recommended when the hinges are exposed outside the room to be protected.

Locks

Available locks

Lock model EZ 9040 or EZ 9044

Multi-point lock (on lock side) for European cylinder.



Lock model 10, 11, or 12

Block and multi-point lock (on four sides) for European cylinder.



Lock model 21, 22, or 23. (70c00)

Multi-point lock (on four sides) for European cylinder.



Lock model WH AV2 or WH EAV

Lock with dead bolt and two hooks (lock side) for European cylinder.


Cylinders

Available cylinders

Protected key

Restriction against abusive duplication.



Cylinder body – C4 series

High-security cylinder, protected keys XA1



Knob cylinder

No keys from the inside.



Service keys « SV »

Simple, totally mechanical access control



Dual function cylinder

A key can be introduced from one side of the cylinder when another key is already engaged in the opposite rotor.


Hardware

Available hardware

Stainless steel LMR latch and rosette

Stainless steel fittings in minimalist style.



Fitting Model E

Brass fitting available for lock type 0, 10 and 21



Cylinder protector model AL

Stainless steel protection mounted on an armoured plate.



Cylinder protector model AL-200400 K

Stainless steel protection.



Cylinder protector model E

Protection in quenched steel with rotary element on ball bearing.



Cylinder protector model EZ-420 P

Protection in quenched steel.



Stainless steel rod

Leaf sustainably easy to use.