Bullet-proof doors Series BRB

Door with one or two steel leaves, with covering on three sides, ±60 mm in thickness, consisting of a double-wall full door panel, made of two zinc-plated steel sheets with a thickness of 30/10 per leaf. The internal insulation is in high density rock wool and multiplex plaques.

U-shaped with wall head covering.

A frame that sandwiches the wall head will be used for most interior doors. The frame is made of zinc-plated steel sheets with a minimum thickness of 30/10. It is screwed to the bay with at least three screws per stile. The number, location and type of fixation are chosen by the fitter who will adapt optimally to the masonry.

A 40 x 20 x 1.5 mm tubular strip is riveted onto the frame, and conceals the light that enters between the leaf and the frame on the non-hinged side.

Acoustic insulation:– 42 db.

Tubular.

The leaves are suspended from the frame with at least three welded steel hinges with an external diameter of 20 mm; they are mounted on ball bearings, which enables them to have great inertia, for openings slightly exceeding 180°. In addition, they are designed so that it is impossible to drive out their pin.

We can add anti-unhinging mechanisms as an option. This is not very useful for doors with hinges inside the room to be protected. Conversely, they are highly recommended when the hinges are exposed outside the room to be protected.

Available locks

Lock model KFV 113 Latch and dead bolt lock for European cylinder.

Lock model EZ-700 Lock for European latch cylinder and 4 anchoring points.

Lock model EZ 9040 or EZ 9044 Multi-point lock (on lock side) for European cylinder.

Lock model 10, 11, or 12 Block and multi-point lock (on four sides) for European cylinder.

Lock model 21, 22, or 23. (70c00) Multi-point lock (on four sides) for European cylinder.

Lock model WH AV2 or WH EAV Lock with dead bolt and two hooks (lock side) for European cylinder.

Lock model B&B-Locks Trilock T3 Motorised lock with three releasable dead bolts (lock side) for European cylinder.

Available cylinders

Protected key Restriction against abusive duplication.

Cylinder body – C4 series High-security cylinder, protected keys XA1

Knob cylinder No keys from the inside.

Service keys « SV » Simple, totally mechanical access control

Dual function cylinder A key can be introduced from one side of the cylinder when another key is already engaged in the opposite rotor.

Available hardware

Stainless steel LMR latch and rosette Stainless steel fittings in minimalist style.

Fitting Model E Brass fitting available for lock type 0, 10 and 21

Cylinder protector model AL Stainless steel protection mounted on an armoured plate.

Cylinder protector model AL-200400 K Stainless steel protection.

Cylinder protector model E Protection in quenched steel with rotary element on ball bearing.

Cylinder protector model EZ-420 P Protection in quenched steel.

Stainless steel rod Leaf sustainably easy to use.